ERR_CONNECTION_RESET Error Unable to Connect
ERR_CONNECTION_RESET Error Browser ·Google Chrome may display error messages such as ERR_CONNECTION_RESET, Connection Reset, Inaccessible Site, or Network Change Detected while browsing the web.
If these error messages occur, you will not be able to successfully connect to the website.
Therefore, this article explains why and how to deal with the symptoms of ERR_CONNECTION_RESET errors that prevent you from connecting to the website.
ERR_CONNECTION_RESET Error Causes and Workarounds
restart the modem
If the modem is not working well, try unplugging it and restarting it.After unplugging for about 90 seconds, you can reconnect and restart to perform the reset.
Check the LAN Cable Connection
Check to see if the LAN cable on your PC/modem is unplugged and connected securely.At first glance, it may appear to be connected and become unstable, so it is important to touch and check.
If you do not have access to a particular site:
If only one site experiences an ERR_CONNECTION_RESET error, but other sites are accessible, it is highly likely that the particular site is over-accessed and under-loaded or experiencing some kind of failure.
In this case, try accessing again after a while.
Delete browser cache cookies
There may be ERR_CONNECTION_RESET errors due to a corrupt browser cache or a cookie problem.In this case, try deleting the browser cache and cookies.Learn how to remove cache cookies from Google Chrome.
Click the menu button in the upper right corner of the Google Chrome window, click the menu button in the upper right corner of the Google Chrome window to open the menu, and hover your mouse over Other Tools.
The submenu appears, click Clear Browsing History, and the submenu appears, so let's click Clear Browsing History.
You can also press Ctrl+Shift+Delete at the same time to open the view history erase.
The Delete Browsing History Data window will be displayed, so set the period to Full Period, check the View History, Cookies and Other Site Data, and click Delete Data by clicking the Delete Data button.
After deleting the browsing history data, restart your browser to see if you can connect to the website.
Attempt to Disable IPv6
IPv6, the next-generation protocol, may cause Internet connection errors when enabled.
If IPv6 is causing an ERR_CONNECTION_RESET error, you can resolve it by disabling IPv6.
Click the Start button in the lower left corner of the desktop to open the Start menu, expand the Windows System Tools folder from All Apps, click Control Panel, click the Start button in the lower left corner of the desktop to open the Start menu.
The control panel appears, click Network and Internet, and the control panel appears, so let's click Network and click Network and Internet.
Click Network and Sharing Center to see a list of networks and the Internet. Click Network and Sharing Center to see a list of networks and the Internet.
When the Network and Sharing Center list appears, click Change Adapter Settings on the left menu, and when the Network and Sharing Center list appears, click Change Adapter Settings on the left menu.
Right-click your network adapter and click Properties on the menu. A list of network adapters will appear. Right-click your network adapter and click Properties on the menu.
Uncheck the Internet Protocol Version 6 (TCP/IPv6) check box from the Use this connection list When the network properties appear, uncheck the Internet Protocol Version 6 (TCP/IPv6) check box from the Use this connection list and click OK.This disables IPv6.
Attempt to Change DNS Configuration
If DNS causes an ERR_CONNECTION_RESET error, try deleting the DNS cache or changing the DNS.
Click the Start button at the bottom left of the desktop to open the Start menu, expand the Windows System Tools folder from All Apps, right-click Command Prompt, and click Run as Administrator. Clear the DNS cache first.
Click the Start button in the lower left corner of the desktop to open the Start menu, expand the Windows System Tools folder from All Apps, right-click Command Prompt, and click Run as Administrator to launch it.
Command Prompt When the command prompt starts, type ipconfig /flushdns and press Enter .
If the message キャッシュDNS resolver cache has been successfully flushed されました appears, clearing the DNS cache is complete.
Launch Google Chrome, type "chrome://net-internals/#dns" in the address bar, then launch Google Chrome, type "chrome://net-internals/#dns" in the address bar, and press Enter.
Click the Clear host cache button on the displayed tab and click the Clear host cache button on the displayed tab to clear the DNS cache on Chrome.
Open the properties of your network adapter, select Internet Protocol Version 4 (TCP/IPv4) from the "This connection uses the following" list, click Properties, and finally set up the DNS server.
Open the properties of your network adapter, select Internet Protocol Version 4 (TCP/IPv4) from the "This connection uses the following" list, and click Properties.
IPv4 properties are displayed IPv4 properties are displayed, so enter the public DNS address in Use the following DNS server address and click OK to complete.
Incidentally, the image example uses Google's public DNS "Priority DNS Server: 8.8.8.8 · Alternate DNS Server: 8.8.4.4".
Attempt to Temporarily Disable Anti-Virus Software Shield
There is a problem with the compatibility of Google Chrome with the antivirus software deployed on your PC, which can cause an ERR_CONNECTION_RESET error.
In the past, Avast! has seen similar cases.
If antivirus software is the cause, try temporarily disabling the shield to see if you can connect to the website, and then re-enable the shield when you are able to connect.
Attempt to Disable Firewall
You may also be able to connect to a website by disabling the Windows Defender firewall.
However, disabling the Windows Defender firewall is a very security hazard and is not a very recommended method.Once you open the site you want to view, take action such as enabling the firewall immediately.
The Control Panel appears, click System and Security, and the Control Panel appears, so click System and Security.
Click Windows Defender Firewall to see a list of systems and security, click Windows Defender Firewall to see a list of systems and security.
Click Enable or Disable Windows Defender Firewall on the left menu to see a list of Windows Defender firewalls, so click Enable or Disable Windows Defender Firewall on the left menu.
The Customize Firewall Settings window appears, select Disable Windows Defender Firewall under Private Network Settings and Public Network Settings, click OK, select Disable Windows Defender Firewall under Private Network Settings, and click OK.
You can now disable the firewall.
Remember to undo the firewall configuration later.
카테고리 없음
댓글