카테고리 없음
READYNAS RECOVERY | NETGEAR DEVICE FAILURE OR FAILURE
LemonDKel
2022. 8. 7. 03:35
NETGEAR ReadyNAS offers a wide variety of models, from enterprise to personal, and is used by many as a device for storing and sharing data.While ReadyNAS has convenient features such as ReadyCLOUD, Unlimited Snapshots, and X-RAID, it may be difficult to deal with when ReadyNAS fails or experiences data problems due to its unique file system.This section describes how to recover data along with examples of failures and failures that occur when using ReadyNAS.
Table of Contents
0.1. What are examples of failures and symptoms in ReadyNAS?
0.2.ReadyNAS Does Not Start Example
0.3. What Does ReadyNAS Mean When It Shows an Error Message and What to Do?
0.4. ReadyNAS Data Recovery and Symptom Handling
0.5. When ReadyNAS needs to be restored ·How to select a vendor and what to check
0.6. What to keep in mind if you want to recover data from ReadyNAS?
0.7. Typical Series and RAID Level Examples for ReadyNAS from NETGEAR
1. Summary - In case of trouble
What are examples of failures and symptoms in ReadyNAS?
The following are some of the faults and symptoms of NETGEAR ReadyNAS:
ReadyNAS Does Not Start
Cannot access shared folders or data
I can′t use the error message.
↓If you are having trouble accessing shared folders, click here.
AT DATA RECOVERY MEDIUM
What to do if Windows 10 cannot access shared folders?
https://www.adte.jp/rec/hdd/post-1115/
′I cannot access it.You may not have permissions to use this network resource, and you may lose access to the shared folder with error messages such as ′Access denied′.Here′s how to deal with Windows 10 when you can′t access or connect to shared folders.
Example of Why ReadyNAS Does Not Start
When you experience symptoms such as NETGEAR ReadyNAS not starting, you can infer the following causes:
Failure of the system (case) or damage to the power cable.
Excessive Access Causes Defects
Internal hard drive failure or failure
board failure
1. Failure of the unit (case) or damage to the power cable
When ReadyNAS does not start, first check for power issues.It is also important to observe whether the power cord is unplugged, is about to be unplugged, and is not bent.If it does not boot, try reseating the cable only once to see if the problem improves.You should avoid trying again and again.When the main body (case) is broken or about to break, reseating the cable often causes serious conditions, so you need to be careful.In addition, damage to the power and LAN cables as well as the chassis can cause problems such as not being able to boot or access them.
2. Problems due to excessive access
If access to ReadyNAS is concentrated, it can lead to symptoms such as not booting.If you use ReadyNAS as a server for the web and you have a lot of access to the web site, you may experience a server outage if you are too busy to process it.If you have trouble keeping up with the speed of processing due to excessive access, you may need to consider adding more memory, CPUs, and preparing multiple servers.
3. Internal hard drive failure or failure
If ReadyNAS does not boot, the internal hard drive failure or failure is often the cause of the problem.
①The hard drive is experiencing a logical failure.
Logical failure of the hard drive built into ReadyNAS (system or OS part abnormalities or data corruption) can lead to problems such as failure to boot.In the event of a logical failure, deep expertise such as file system remediation and data analysis is required for recovery.
②The hard drive is experiencing a physical failure.
Physical failure of the hard drive in ReadyNAS (disk mechanically damaged, parts physically damaged) can lead to a variety of problems.The hard drive itself is a consumable item, and it often fails physically due to aging.In the event of a physical failure, it is essential to adjust or replace the platter (disk-like part where data is stored) and magnetic head (like a needle to read data) in a dedicated environment such as a clean room.It is difficult to deal with by yourself, and if you continue to operate or work to do something about it, you will end up in an irreversible situation.
4. Failure of the board failure
In addition to the hard drives in ReadyNAS, the board on the equipment itself can be damaged or broken.In that case, it will lead to problems such as not being able to start the device and not being able to access the data.If you suspect a board failure, disconnect the cable and try not to energize it.
↓ If you are thinking about fixing your NAS in case of a failure, please refer to this as well.
AT DATA RECOVERY MEDIUM
Repair and recovery in the event of a NAS problem.
https://www.adte.jp/rec/hdd/post-1185/
In case of trouble such as inaccessible NAS or shared folder, NAS does not work, does not boot, does not turn on, etc., it is important to check where the failure occurred and to take correct action.Here are some of the things you should be careful about when you think of a NAS failure, how to deal with it, and the differences between manufacturer repair and data recovery.
What does ReadyNAS mean when it displays an error message and what to do?
In the event of a ReadyNAS problem or failure, check the contents of the error message on the display LCD panel.The error message changes where ReadyNAS failed, what failed, and what to do.I often panic when I get an error message.If you think that the stored data is important or that it will be a problem if it is lost, don′t force yourself to proceed with the work or the operation.In many cases, there is not only one part that has failed or failed, and if you make a mistake, the risk of data loss increases.
Error Message: Example of failure and semantic corrective action
btrfs_merge_bio_hook+a0 Check if the data in the disk is failing ·Filesystem related error message boot menu → ReadOnly mode can boot.If it is difficult or the data inside is important, contact the restoration company first.
btrfs_merge_bio_hook+a4 Same as above
A restart is attempted only once when access is not possible to an apparatus having a large area ′entry point′ for executing a _raw_spin_lock_irq+8 program.If the problem cannot be resolved, contact the recovery company is prioritized.
Mv_xor_status + 88 Same as conflicting actions on kernel
Processing error in __percpu_counter_add+20 Kernel
kmem_cache_alloc+5c Shut down equipment with insufficient memory → Unplug the power cord and drain for about 5 minutes if it cannot boot, and retrieve logs to determine the cause of insufficient memory.
Out_of_memory memory is running out of backup, snapshots, apps, virus software, and so on.Obtain logs and determine the cause of low memory.
Kthread_data + B Btrfs (File System) Errors
B Btrfs is a file system rarely used by NAS other than ReadyNAS. Checked the admin screen logs.Is the OS area root full? → If root, md0 is full, log and consult with the recovery company.
Determined if the problem is corrected by disabling the power related and power timer settings that appear when the do_exit+8d8 ARM-based device (RN102/RN104/RN202/RN204/RN212/RN214/RN2120) fails during shutdown.
(null) +fff88040 a494558 There is a problem with the user space error add-on to run the normal program.Removed add-ons → Checked to see if the problem improves.
·How to obtain logs
①configuration file
Log in to Administration Screen → System → Settings → Backup Settings → Download Settings File
②system log
Login to Administration → System → Log → Download Log
↓ If you are having trouble accessing your NAS, please visit here as well.
AT DATA RECOVERY MEDIUM
How to Resolve Inaccessible NAS for Windows 10 Users
https://www.adte.jp/rec/hdd/post-625/
Unable to access or connect to the NAS used by the company.If the NAS, which stores important data such as not connecting to the shared folder or not being able to enter, suddenly becomes unusable, the business will be severely disrupted.There was no problem until yesterday, and I was able to use it until just before.
ReadyNAS Data Recovery and Symptom Handling
If you experience symptoms such as ReadyNAS not starting, no power, no access, and so on, there are recovery and workarounds as follows:
Checking the power supply and peripherals
In addition to the error message, check for a solid status slump.
How Do I Replace the Hard Drive?
How to consult a data recovery specialist
1. Check the power supply and peripherals
When equipment, such as ReadyNAS manufactured by NETGEAR, fails to boot, the power cable is disconnected or is about to disconnect, and the peripheral is often not working properly.Let′s start by calmly reconnecting cables and peripherals.You must not reseat it again and again.Operations that allow current to flow often put a strain on the equipment and cause serious conditions.Because the risk of data loss increases, you should only re-connect once.
2. In addition to the error message, check if the status slump is lit.
If your ReadyNAS has a problem or symptom, check the status of the status by looking at the error message as well as how to turn on the status slump.Be careful when the disk LED is blinking.If you don′t want to lose data, turn off the power to prevent the condition from deteriorating.
·ReadyNAS ·Example of storage system status slump display
Lamp Type Status Example Notes
Power button and LED steady—Power on
Blinking—Starting or shutting down
Off—Press the power and LED buttons when you want to power on a non-powered ReadyNAS.
Disk LED (1.2) ON: Power on and disk is functioning normally
Blinking: Indicates whether the disk has been ejected, an error has occurred, or is resynchronizing.
Off: The LED indicating the state of the disk, which is located on the front of a non-empty or non-empty.
On disk activity LED—Disk is present
blinking:disk is active
Off—LED indicating the operating state of the disk on the NAS where the disk is not present.
3. How do I replace the hard drive?
If the hard drive inside ReadyNAS fails or breaks, replacing the hard drive will allow the device to boot and return to operational status.However, replacing a hard drive in the event of a failed hard drive may result in a RAID rebuild (rebuild) and may result in data loss.It is better not to replace the hard drive if the stored data is more important than returning the device to work or if you want to retrieve the data.The hard drive may be replaced and all data may disappear.Let′s be careful.
4. How to consult with a data recovery specialist
When ReadyNAS fails or fails, you often panic.If the data stored on the device is important, or if you think you need to take it out, choose a method to consult a data recovery specialist.Because ReadyNAS uses a file system called Btrfs, which is not commonly used by other NASs, deep expertise and technical capabilities are also essential when data recovery is needed.If you are having trouble with NETGEAR′s ReadyNAS, check whether you have recovered or not when choosing a vendor.
When ReadyNAS needs to be restored - How to choose a vendor and what to check
There are many data recovery companies, so you may be wondering which company to consult.In addition to Btrfs (file system), ReadyNAS is often configured with a special RAID called thin provisioning, and has its own automatic volume expansion capability on a NETGEAR device called X-RAID, which makes it necessary to choose a recovery provider to respond to failures.By any chance, if you send it to a restoration company that has low technical capabilities, has no track record, or has no knowledge, it will not only be able to retrieve the data, but the condition may deteriorate.If you want to recover data from ReadyNAS, check the following items and select a vendor.
Is it a company with high technical capabilities (does it have its own technology or AI technology)?
What is the speed of recovery and response?
Is there a description of the cost on the homepage such as the restoration fee and plan?
Are information management and confidentiality obligations thorough?
Has ReadyNAS or RAID been recovered?
There are significant differences in technical capabilities and data recovery services for each recovery company.If you have any concerns, check if you have a data recovery company that has ′original technology′ or ′AI technology.′It serves as a standard for selecting high-tech companies, and because of its high-tech capabilities, it is possible to recover data quickly and at a low cost.No company can do the same restoration.If the data stored on the device is important, it is also important to choose the first vendor to consult with.If you search for it and choose it easily because it′s close to your house or company, you′ll regret it.
What to keep in mind if you want to recover data from ReadyNAS?
When you want to recover data from ReadyNAS, be aware of the following:
Avoid repeated power-on and power-off and reboots
Avoid replacing or replacing hard drives - Risk of rebuilding
It is not allowed to connect the HDD to the PC alone.
avoid using data recovery software
1. Do not repeatedly turn the power on or off or restart.
Not only NETGEAR ReadyNAS, but it′s also easy to turn on, turn off, reboot, etc. on the hard drive where the data is stored, but it also puts a lot of pressure on the device.In the event of a hard drive failure, power is turned on, turned off, or restarted, resulting in severe conditions, increased difficulty in data recovery, and difficulty in recovery itself.Be careful not to reseat power cables that are equally burdensome.
2. Avoid replacing or replacing hard drives · Risk of rebuilding
If a hard drive in a NETGEAR ReadyNAS fails, it is recommended that you avoid replacing or replacing the hard drive.Removing the hard drive will cause a RAID rebuild.Rebuilds often fail or stop in the middle, and often cause new problems such as RAID corruption and other hard drives.You might want to retrieve the data, but on the contrary, it can be difficult to recover.If you really want to replace or rebuild a hard drive, consult a professional data recovery company before proceeding.
↓ What is a RAID rebuild?The following details the risks and failures.
AT DATA RECOVERY MEDIUM
RAID rebuild (rebuild) failed or Method
https://www.adte.jp/rec/hdd/post-1549/
If a hard drive that is configured for RAID is damaged, data can be recovered by replacing the hard drive and reconfiguring it (rebuilding), and many of you may recognize that the system can be restored to its original state.However, reconstruction itself is a high risk.
3. Connecting a HDD to a PC alone is not allowed.
The hard drives in the NETGEAR ReadyNAS are RAID-built, so even if you take them out and connect them to your computer alone, you won′t be able to see the data inside.′Also, when connecting, ′′Do you want to format it?′′′You will often see error messages such as ′You must format it′ and if you format it hastily, the saved data will disappear.In addition, just connecting the HDD to the PC alone can overwrite the data and make the condition worse, and only the disadvantages stand out.Let′s be careful.
4. Avoid using software for data recovery
Data recovery software supports only minor logical failures.It is difficult for individuals to determine the type and extent of the failure (mild, moderate, or severe), and for hard drives configuring RAID, the data is often overwritten or deteriorated even when using software, so be careful.If you really want to use the recovery software, consult a professional data recovery company before proceeding.
Typical NETGEAR ReadyNAS Series and RAID Level Example
The following types of ReadyNAS are available:
Series Name Model
ReadyNAS210 Series RN21200-100AJS · RN21400-100AJS
ReadyNAS420 Series RN42200-100AJS · RN42400-100AJS · RN42600-100AJS · RN42800-100AJS
ReadyNAS520X Series RN524X00-100AJS·RN526X00-100AJS·RN528X00-100AJS
ReadyNAS620X Series RN626X00-100AJS·RN628X00-100AJS
·Examples of the main RAID levels used in ReadyNAS manufactured by NETGEAR
RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10 (1+0) / RAID 50 (5+0) / RAID 60 (6+0)
·Examples of the number of HDDs that can be installed
2 / 4 / 6 / 8
Summary - In case of trouble
If you are using NETGEAR ReadyNAS and your device does not start, you cannot access data, or you receive an error message, you should stop using the device.It is extremely dangerous to turn the power on, off, restart, or continue to power up when the system (case) or hard drive is failing.As a result of doing something that can be done easily, the data may disappear and the recovery itself may become difficult.NETGEAR ReadyNAS requires deep expertise, advanced technology, and careful selection of recovery companies to consult with.Advanced technology is proprietary and AI technology, and with its advanced technology, it has been able to recover data from various recording media such as ReadyNAS, many RAID servers, NAS, and HDDs.If you are in trouble, why don′t you start with a free data recovery consultation?
Table of Contents
0.1. What are examples of failures and symptoms in ReadyNAS?
0.2.ReadyNAS Does Not Start Example
0.3. What Does ReadyNAS Mean When It Shows an Error Message and What to Do?
0.4. ReadyNAS Data Recovery and Symptom Handling
0.5. When ReadyNAS needs to be restored ·How to select a vendor and what to check
0.6. What to keep in mind if you want to recover data from ReadyNAS?
0.7. Typical Series and RAID Level Examples for ReadyNAS from NETGEAR
1. Summary - In case of trouble
What are examples of failures and symptoms in ReadyNAS?
The following are some of the faults and symptoms of NETGEAR ReadyNAS:
ReadyNAS Does Not Start
Cannot access shared folders or data
I can′t use the error message.
↓If you are having trouble accessing shared folders, click here.
AT DATA RECOVERY MEDIUM
What to do if Windows 10 cannot access shared folders?
https://www.adte.jp/rec/hdd/post-1115/
′I cannot access it.You may not have permissions to use this network resource, and you may lose access to the shared folder with error messages such as ′Access denied′.Here′s how to deal with Windows 10 when you can′t access or connect to shared folders.
Example of Why ReadyNAS Does Not Start
When you experience symptoms such as NETGEAR ReadyNAS not starting, you can infer the following causes:
Failure of the system (case) or damage to the power cable.
Excessive Access Causes Defects
Internal hard drive failure or failure
board failure
1. Failure of the unit (case) or damage to the power cable
When ReadyNAS does not start, first check for power issues.It is also important to observe whether the power cord is unplugged, is about to be unplugged, and is not bent.If it does not boot, try reseating the cable only once to see if the problem improves.You should avoid trying again and again.When the main body (case) is broken or about to break, reseating the cable often causes serious conditions, so you need to be careful.In addition, damage to the power and LAN cables as well as the chassis can cause problems such as not being able to boot or access them.
2. Problems due to excessive access
If access to ReadyNAS is concentrated, it can lead to symptoms such as not booting.If you use ReadyNAS as a server for the web and you have a lot of access to the web site, you may experience a server outage if you are too busy to process it.If you have trouble keeping up with the speed of processing due to excessive access, you may need to consider adding more memory, CPUs, and preparing multiple servers.
3. Internal hard drive failure or failure
If ReadyNAS does not boot, the internal hard drive failure or failure is often the cause of the problem.
①The hard drive is experiencing a logical failure.
Logical failure of the hard drive built into ReadyNAS (system or OS part abnormalities or data corruption) can lead to problems such as failure to boot.In the event of a logical failure, deep expertise such as file system remediation and data analysis is required for recovery.
②The hard drive is experiencing a physical failure.
Physical failure of the hard drive in ReadyNAS (disk mechanically damaged, parts physically damaged) can lead to a variety of problems.The hard drive itself is a consumable item, and it often fails physically due to aging.In the event of a physical failure, it is essential to adjust or replace the platter (disk-like part where data is stored) and magnetic head (like a needle to read data) in a dedicated environment such as a clean room.It is difficult to deal with by yourself, and if you continue to operate or work to do something about it, you will end up in an irreversible situation.
4. Failure of the board failure
In addition to the hard drives in ReadyNAS, the board on the equipment itself can be damaged or broken.In that case, it will lead to problems such as not being able to start the device and not being able to access the data.If you suspect a board failure, disconnect the cable and try not to energize it.
↓ If you are thinking about fixing your NAS in case of a failure, please refer to this as well.
AT DATA RECOVERY MEDIUM
Repair and recovery in the event of a NAS problem.
https://www.adte.jp/rec/hdd/post-1185/
In case of trouble such as inaccessible NAS or shared folder, NAS does not work, does not boot, does not turn on, etc., it is important to check where the failure occurred and to take correct action.Here are some of the things you should be careful about when you think of a NAS failure, how to deal with it, and the differences between manufacturer repair and data recovery.
What does ReadyNAS mean when it displays an error message and what to do?
In the event of a ReadyNAS problem or failure, check the contents of the error message on the display LCD panel.The error message changes where ReadyNAS failed, what failed, and what to do.I often panic when I get an error message.If you think that the stored data is important or that it will be a problem if it is lost, don′t force yourself to proceed with the work or the operation.In many cases, there is not only one part that has failed or failed, and if you make a mistake, the risk of data loss increases.
Error Message: Example of failure and semantic corrective action
btrfs_merge_bio_hook+a0 Check if the data in the disk is failing ·Filesystem related error message boot menu → ReadOnly mode can boot.If it is difficult or the data inside is important, contact the restoration company first.
btrfs_merge_bio_hook+a4 Same as above
A restart is attempted only once when access is not possible to an apparatus having a large area ′entry point′ for executing a _raw_spin_lock_irq+8 program.If the problem cannot be resolved, contact the recovery company is prioritized.
Mv_xor_status + 88 Same as conflicting actions on kernel
Processing error in __percpu_counter_add+20 Kernel
kmem_cache_alloc+5c Shut down equipment with insufficient memory → Unplug the power cord and drain for about 5 minutes if it cannot boot, and retrieve logs to determine the cause of insufficient memory.
Out_of_memory memory is running out of backup, snapshots, apps, virus software, and so on.Obtain logs and determine the cause of low memory.
Kthread_data + B Btrfs (File System) Errors
B Btrfs is a file system rarely used by NAS other than ReadyNAS. Checked the admin screen logs.Is the OS area root full? → If root, md0 is full, log and consult with the recovery company.
Determined if the problem is corrected by disabling the power related and power timer settings that appear when the do_exit+8d8 ARM-based device (RN102/RN104/RN202/RN204/RN212/RN214/RN2120) fails during shutdown.
(null) +fff88040 a494558 There is a problem with the user space error add-on to run the normal program.Removed add-ons → Checked to see if the problem improves.
·How to obtain logs
①configuration file
Log in to Administration Screen → System → Settings → Backup Settings → Download Settings File
②system log
Login to Administration → System → Log → Download Log
↓ If you are having trouble accessing your NAS, please visit here as well.
AT DATA RECOVERY MEDIUM
How to Resolve Inaccessible NAS for Windows 10 Users
https://www.adte.jp/rec/hdd/post-625/
Unable to access or connect to the NAS used by the company.If the NAS, which stores important data such as not connecting to the shared folder or not being able to enter, suddenly becomes unusable, the business will be severely disrupted.There was no problem until yesterday, and I was able to use it until just before.
ReadyNAS Data Recovery and Symptom Handling
If you experience symptoms such as ReadyNAS not starting, no power, no access, and so on, there are recovery and workarounds as follows:
Checking the power supply and peripherals
In addition to the error message, check for a solid status slump.
How Do I Replace the Hard Drive?
How to consult a data recovery specialist
1. Check the power supply and peripherals
When equipment, such as ReadyNAS manufactured by NETGEAR, fails to boot, the power cable is disconnected or is about to disconnect, and the peripheral is often not working properly.Let′s start by calmly reconnecting cables and peripherals.You must not reseat it again and again.Operations that allow current to flow often put a strain on the equipment and cause serious conditions.Because the risk of data loss increases, you should only re-connect once.
2. In addition to the error message, check if the status slump is lit.
If your ReadyNAS has a problem or symptom, check the status of the status by looking at the error message as well as how to turn on the status slump.Be careful when the disk LED is blinking.If you don′t want to lose data, turn off the power to prevent the condition from deteriorating.
·ReadyNAS ·Example of storage system status slump display
Lamp Type Status Example Notes
Power button and LED steady—Power on
Blinking—Starting or shutting down
Off—Press the power and LED buttons when you want to power on a non-powered ReadyNAS.
Disk LED (1.2) ON: Power on and disk is functioning normally
Blinking: Indicates whether the disk has been ejected, an error has occurred, or is resynchronizing.
Off: The LED indicating the state of the disk, which is located on the front of a non-empty or non-empty.
On disk activity LED—Disk is present
blinking:disk is active
Off—LED indicating the operating state of the disk on the NAS where the disk is not present.
3. How do I replace the hard drive?
If the hard drive inside ReadyNAS fails or breaks, replacing the hard drive will allow the device to boot and return to operational status.However, replacing a hard drive in the event of a failed hard drive may result in a RAID rebuild (rebuild) and may result in data loss.It is better not to replace the hard drive if the stored data is more important than returning the device to work or if you want to retrieve the data.The hard drive may be replaced and all data may disappear.Let′s be careful.
4. How to consult with a data recovery specialist
When ReadyNAS fails or fails, you often panic.If the data stored on the device is important, or if you think you need to take it out, choose a method to consult a data recovery specialist.Because ReadyNAS uses a file system called Btrfs, which is not commonly used by other NASs, deep expertise and technical capabilities are also essential when data recovery is needed.If you are having trouble with NETGEAR′s ReadyNAS, check whether you have recovered or not when choosing a vendor.
When ReadyNAS needs to be restored - How to choose a vendor and what to check
There are many data recovery companies, so you may be wondering which company to consult.In addition to Btrfs (file system), ReadyNAS is often configured with a special RAID called thin provisioning, and has its own automatic volume expansion capability on a NETGEAR device called X-RAID, which makes it necessary to choose a recovery provider to respond to failures.By any chance, if you send it to a restoration company that has low technical capabilities, has no track record, or has no knowledge, it will not only be able to retrieve the data, but the condition may deteriorate.If you want to recover data from ReadyNAS, check the following items and select a vendor.
Is it a company with high technical capabilities (does it have its own technology or AI technology)?
What is the speed of recovery and response?
Is there a description of the cost on the homepage such as the restoration fee and plan?
Are information management and confidentiality obligations thorough?
Has ReadyNAS or RAID been recovered?
There are significant differences in technical capabilities and data recovery services for each recovery company.If you have any concerns, check if you have a data recovery company that has ′original technology′ or ′AI technology.′It serves as a standard for selecting high-tech companies, and because of its high-tech capabilities, it is possible to recover data quickly and at a low cost.No company can do the same restoration.If the data stored on the device is important, it is also important to choose the first vendor to consult with.If you search for it and choose it easily because it′s close to your house or company, you′ll regret it.
What to keep in mind if you want to recover data from ReadyNAS?
When you want to recover data from ReadyNAS, be aware of the following:
Avoid repeated power-on and power-off and reboots
Avoid replacing or replacing hard drives - Risk of rebuilding
It is not allowed to connect the HDD to the PC alone.
avoid using data recovery software
1. Do not repeatedly turn the power on or off or restart.
Not only NETGEAR ReadyNAS, but it′s also easy to turn on, turn off, reboot, etc. on the hard drive where the data is stored, but it also puts a lot of pressure on the device.In the event of a hard drive failure, power is turned on, turned off, or restarted, resulting in severe conditions, increased difficulty in data recovery, and difficulty in recovery itself.Be careful not to reseat power cables that are equally burdensome.
2. Avoid replacing or replacing hard drives · Risk of rebuilding
If a hard drive in a NETGEAR ReadyNAS fails, it is recommended that you avoid replacing or replacing the hard drive.Removing the hard drive will cause a RAID rebuild.Rebuilds often fail or stop in the middle, and often cause new problems such as RAID corruption and other hard drives.You might want to retrieve the data, but on the contrary, it can be difficult to recover.If you really want to replace or rebuild a hard drive, consult a professional data recovery company before proceeding.
↓ What is a RAID rebuild?The following details the risks and failures.
AT DATA RECOVERY MEDIUM
RAID rebuild (rebuild) failed or Method
https://www.adte.jp/rec/hdd/post-1549/
If a hard drive that is configured for RAID is damaged, data can be recovered by replacing the hard drive and reconfiguring it (rebuilding), and many of you may recognize that the system can be restored to its original state.However, reconstruction itself is a high risk.
3. Connecting a HDD to a PC alone is not allowed.
The hard drives in the NETGEAR ReadyNAS are RAID-built, so even if you take them out and connect them to your computer alone, you won′t be able to see the data inside.′Also, when connecting, ′′Do you want to format it?′′′You will often see error messages such as ′You must format it′ and if you format it hastily, the saved data will disappear.In addition, just connecting the HDD to the PC alone can overwrite the data and make the condition worse, and only the disadvantages stand out.Let′s be careful.
4. Avoid using software for data recovery
Data recovery software supports only minor logical failures.It is difficult for individuals to determine the type and extent of the failure (mild, moderate, or severe), and for hard drives configuring RAID, the data is often overwritten or deteriorated even when using software, so be careful.If you really want to use the recovery software, consult a professional data recovery company before proceeding.
Typical NETGEAR ReadyNAS Series and RAID Level Example
The following types of ReadyNAS are available:
Series Name Model
ReadyNAS210 Series RN21200-100AJS · RN21400-100AJS
ReadyNAS420 Series RN42200-100AJS · RN42400-100AJS · RN42600-100AJS · RN42800-100AJS
ReadyNAS520X Series RN524X00-100AJS·RN526X00-100AJS·RN528X00-100AJS
ReadyNAS620X Series RN626X00-100AJS·RN628X00-100AJS
·Examples of the main RAID levels used in ReadyNAS manufactured by NETGEAR
RAID 0 / RAID 1 / RAID 5 / RAID 6 / RAID 10 (1+0) / RAID 50 (5+0) / RAID 60 (6+0)
·Examples of the number of HDDs that can be installed
2 / 4 / 6 / 8
Summary - In case of trouble
If you are using NETGEAR ReadyNAS and your device does not start, you cannot access data, or you receive an error message, you should stop using the device.It is extremely dangerous to turn the power on, off, restart, or continue to power up when the system (case) or hard drive is failing.As a result of doing something that can be done easily, the data may disappear and the recovery itself may become difficult.NETGEAR ReadyNAS requires deep expertise, advanced technology, and careful selection of recovery companies to consult with.Advanced technology is proprietary and AI technology, and with its advanced technology, it has been able to recover data from various recording media such as ReadyNAS, many RAID servers, NAS, and HDDs.If you are in trouble, why don′t you start with a free data recovery consultation?